1. Insert CD into the CD-ROM drive.
2. After approximately one minute, the program will automatically load and provide instruction prompts
   
   OR
   Click on the button, select Run...
3. Type D:SETUP (or E:SETUP) and press <Enter>.
4. Follow the instructions on the screen.
5. You will be asked to select Destination directories.
6. The default destination directory for ChefTec is C:\Program Files\ChefTec. If you want to change this, choose . Click onto the new drive specification and/or different directory.
7. The default destination directory for ChefTec Data is C:\Program Files\ChefTec\Data. If you want to change this, choose . Click onto the new drive specification and/or different directory.
8. ChefTec will automatically setup an icon on your desktop.

The program may continue to install after you see the "Finish" screen.

The drive where ChefTec is installed on the Server must have full read and write access and be shared!

To install, follow the steps outlined below:

1. Insert CD into the CD-ROM drive.
2. After approximately one minute, the program will automatically load and provide instruction prompts
   
   OR
   Click on the button, select Run...
3. Type D:SETUP (or E:SETUP) and press <Enter>.
4. Follow the instructions on the screen.
5. You will be asked to select the destination data directory. You must choose a shared drive and directories on the Server, i.e., a drive that is accessible/visible to the clients!!!
6. The default destination directory for ChefTec Data is C:\Program Files\ChefTec\Data. If you want to change this, choose . Click onto the new drive specification and/or different directory.
7. ChefTec will automatically setup an icon on your desktop.

The program may continue to install after you see the "Finish" screen.

Please wait a few minutes before starting ChefTec.

If you are unable to install the software onto the server directly, you can install the program from a client onto the server. This will place the proper files onto the server. Example: The server computer has no CD-drive. The server software can be installed from any client with a CD-drive that is visible to the server.

Option 1: (Assume that the server sees the client CD-drive as drive G:.) From the server, with the CD in the client CD-drive, click on Start | Run. Type G:\SETUP. Click <OK> . Follow the instructions for steps 5-8 above.

Option 2: (Assume that the client sees the server shared directory as N:.) From the client follow the instructions for steps 2-8 above. You would change the directory path drive from C: to N:... .

If you do not want to install any software onto the server, you may copy the required files from a client to the server. You can then run ChefTec from any client. Follow the instructions above to install the full ChefTec program "locally" onto a client. Once the installation on the client has been completed, copy the ChefTec directory and its subdirectories onto the server drive and path desired. Then run the client program below for other clients. The client computer on which the full ChefTec was installed must have additional changes made. To complete these changes, please contact our customer support department to make an appointment.

The Clients must have access to the drive on the Server where ChefTec is installed!

The Server version must be installed before the Client version can be installed!

To install, simply run (from the client) the program SetupClient.exe located on the ChefTec directory that you chose on your server. The drive on the server where ChefTec was installed often has a different label as seen by a client, e.g., C: on the server may be N: on the client! Please contact your network administrator if you have ANY questions about the process.

Outlined below is an example of the installation if you kept C:\Program Files\ChefTec as the ChefTec directory on the server. The client reads the server C: drive as N:.

1. Click on the button, select Run.
2. Type "N:\PROGRAM FILES\CHEFTEC\SETUPCLIENT" and press <Enter>. Note that the quotations marks are necessary.
3. You will be prompted to choose a destination directory (default C:\Program Files\ChefTec). This must be the same as the directory chosen for the main program in step 6, above!
4. ChefTec will automatically setup an icon on your desktop.

If you receive a message that Windows cannot find the specified file or components, you have specified the wrong drive and/or ChefTec directory. Correct the path in the Run window and run the program again.

Installation Instructions for the BDE Administrator

SetupClient also installs the Borland database engine (BDE), which cannot "guess" which network path to follow to the network directory. This engine on each computer is what allows the computers to share access control files which allow multiple users to access the ChefTec files on the shared drive simultaneously. If these engines are not all looking at the same network directory for their access control files, you get the "Directory is controlled by another .NET file" error when trying to run multiple clients. To avoid this error, you must configure each client computer's BDE administrator to look in the same location.

1. Click on the button, select Settings, select Control Panels, and launch the BDE Administrator in the Control Panel folder.
2. In BDE Administrator, click on the Configuration tab, if not already selected,
3. In the Configuration tab, click on Click on the + by "Drivers". (If - move to next step.)
4. Click on the + by "Native". (If - move to next step.)
5. Click on "Paradox"
6. On the "Definition" side, click on the "Net Dir" specified on the far right.
7. The NET DIR default setting is C:\. This is wrong. Change it to the directory you specified as the ChefTec main program directory in Step 3 of the Setup Client process (e.g. N:\Program Files\ChefTec\).
8. Now click on BLOCK SIZE and change it to "4096".
9. Close the BDE Administrator to save all changes. Note: if you do not see a message asking you if its okay to save all changes, then you need to do steps 1-9 again.

1. Close ChefTec and any other open programs.
2. Insert CD-ROM DISC into the CD-ROM drive.
3. After approximately one minute, the program will automatically load and provide instruction prompts
   
   OR
   Click on the button, select Run...
4. Type D:SETUP (or E:SETUP) and press <Enter>.
5. You will be asked to select Destination directories.
6. The default destination directory for ChefTec is C:\Program Files\ChefTec. If you want to change this, choose . Click onto the new drive specification and/or different directory.
7. The default destination directory for ChefTec Data is C:\Program Files\ChefTec\Data.
8. If you want to change this, choose . Click onto the new drive specification and/or different directory.
9. ChefTec will automatically setup an icon on your desktop.

The program may continue to install after you see the "Finish" screen.